1WT_6SSP_1_5m_3w: 1-Wire Temperature sensor with stainless steel probe & 5m long, 3-wire cable. 1-wire Heat shrink is used to

Heat shrink is used to provide an additional seal and strain relief at the junction between the stainless steel tube and the sensor cable

the Exstreamer-205 has stereo RCA line-inputs for playback of local sources

Audio can be transmitted one way or in a full duplex configuration

The sensor also has two 0-5V / 0-10V / 4-20mA analog outputs that can provide a signal equivalent to the current temperature & humidity values

Part #: 10K_6SSP_FLNG_4_2m_100C

1WT_6SSP_1_5m_3w: 1-Wire Temperature sensor with stainless steel probe & 5m long, 3-wire cable. 1-wire Heat shrink is used toPart #: 1WT_6SSP_1_5m_3w This low cost sensor has a 1. 2 inch long stainless steel probe and a 5m long jacketed cable with 3 conductors wired to a DS18B20 chip. Since this sensor uses the 3 wire configuration, you have the option to connect the sensor in 3 wire mode with a separate Vdd wire or you can tie the Vdd wire and the Data wire together to connect the sensor in 2 wire mode, which is used when powering sensors parasitically. Having all 3 wires